*H&B suction nozzles are built tough to be used in extreme conditinds.
*They are made from 16ga aluminized steel for longevity.
*There is a 2"I.D.rolled steal ring welded to the tip for less chances of clogs.
*The suction nozzle is 2.5″O.D. in diameter and work with any 2.5″ suction hose.
*Inlet hose fitting is a welded 1.5″ Male threaded NPT (national pipe thread)
that any will accept a 1.5" pressure hose.
              *Lager sizes available*
Requires a pressure “around” 110GPM (gallons per minute) or 6,600GPH (gallons per hour).

2 1/2" Nozzle