*H&B suction nozzles are built tough to be used in extreme conditinds.

*They are made from 16ga aluminized steel for longevity.

*There is a 3.5"I.D.rolled steal ring welded to the tip for less chances of clogs.

*The suction nozzle is 4″O.D. in diameter and work with any 4″ suction hose.

*Inlet hose fitting is a welded 2″ Male threaded NPT (national pipe thread) that any will accept a 2" pressure hose.

*Lager sizes available*


Requires a pressure “around” 250GPM (gallons per minute) or 15,000GPH (gallons per hour).


4" Nozzle